Vastu16Ask

How to find North with Google Maps for a Vastu check

Top-down drone view of a Bengaluru residential layout with tree-lined streets
Image generated with AI for Vastu16

Next: your whole home. Rules are general. Your plan is specific. Upload it and see where each room of your home falls under both schools.

The short answer

Yes, you can: Google Maps draws its satellite view north-up, so the top of an unrotated, flat view is true North. Line up your building on that view, measure the angle of one outer wall against the vertical, and use that angle to set North on your floor plan. A map gives true North; a phone compass gives magnetic North.

The steps here show how to find North direction using Google Maps when you are not at the property, for example as a buyer abroad or before a site visit. Vastu16 uses the same idea in its check. Our broader guide to finding North for Vastu compares this method with the plan's arrow and a compass.

Why is a satellite map a good North reference?

Google's map uses latitude and longitude on the WGS84 standard and draws them with the Mercator projection. On that projection, x increases to the east and y increases to the south across the whole map, so north is straight up everywhere on an unrotated view [1]. Google's documentation also defines the map's bearing in degrees from true north: a bearing of 0 means the top of the map points to true north [2].

A compass works differently. It points to magnetic North, and magnetic declination is the angle between magnetic North and true North [7]. The field also changes over time, so declination values are revised regularly [8].

Inside a building, a compass has a second problem. NOAA notes that local magnetic anomalies of 3 to 4 degrees are not uncommon and can exceed 10 degrees in rare cases [6]. Steel reinforcement and electronic devices inside buildings disturb phone magnetometers further [12]. A satellite image is not affected by any of this. The main risks with a map are finding the wrong building and reading the angle carelessly.

Checklist

Step by step: pin, align, read the angle

  1. Open the satellite view on a computer. Search the address. Right-click your building to see its latitude and longitude, and check them against the project's location [3].
  2. Keep the view flat and north-up. A tilted view shows perspective, with near features larger and far ones smaller [2]. Google Earth's help advises measuring in a top-down view for accuracy [4]. In Google Earth, clicking the up arrow on the compass returns the view to north-facing [5].
  3. Zoom until your tower fills the screen. Identify your wing from the entrance, the road and the shape on your plan.
  4. Pick one long, straight outer wall of your wing that also appears clearly on your floor plan. Use the roof edge if the base is hidden.
  5. Read the angle. Take a screenshot, draw a line along that wall, and measure its angle from the vertical edge with a protractor or a drawing app that shows rotation. Or right-click both ends of the wall, copy the coordinates [3], and use the spreadsheet formula in the next section.
  6. Transfer the angle to the plan. Rotate the plan until the same wall sits at the same angle, then draw North straight up. Write down the bearing your main door faces.
  7. Cross-check. Compare with the brochure's arrow and, if you can visit, a compass reading taken away from metal.

Reading the bearing from two map points

For step 5, put the first corner's latitude in A1 and longitude in B1, and the second corner's in A2 and B2. In Excel or Google Sheets, this formula gives the wall's bearing in degrees clockwise from true North:

=MOD(DEGREES(ATAN2(A2-A1, (B2-B1)*COS(RADIANS(A1)))), 360)

The cosine term corrects for longitude lines drawing closer together away from the equator. Over the length of one building, this flat approximation is fine. A wall has two directions, so the formula may return a number 180 degrees from the one you want. Use the plan to pick the right one.

What you record Example entry Why it matters
Wall used North-east wall of B wing So anyone can repeat the reading
Wall bearing Your number, in degrees Sets the plan's rotation
Main door facing Your number, in degrees Decides the entrance reading
Cross-check Brochure arrow, compass, or both Shows how far to trust North

What about towers with several wings?

Many towers are L-shaped, Y-shaped or built as several wings around a core. Each wing can sit at a different angle, so a flat in one wing can face a different direction from an identical flat in the next. Always read the wall of your own wing, not the tower's outline as a whole.

The plan helps you match the right wing. Look for the lift core, the shape of the balconies and the position of the main entrance. If two wings are mirror images, find the road or the podium entrance on the plan and match it to the map.

Builders' brochures often draw one North arrow for the whole site. That arrow can be approximate, and it says nothing about your wing's angle. Our post on brochure North arrows covers how far to trust them.

Limits: map imagery, new buildings and tilt

Satellite imagery is captured on a certain date. A tower finished recently may not appear, or may appear as a construction site. In that case, read the angle of the plot boundary or a road the plan shows, and treat the result as approximate until you can confirm it on site.

Tall buildings in a tilted view can look skewed, because perspective enlarges near features [2]. Stay in the flat top-down view and trace an edge that runs parallel to your wall, such as the roofline.

A map gives true North. Many Vastu consultants read a magnetic compass on site, so the difference matters where declination is large. In Mumbai, declination is about 0 degrees, in Delhi about 1.3 degrees east and in Bengaluru about 1.1 degrees west. In New York it is about 12.5 degrees west and in Seattle about 14.9 degrees east [9]. Our guide to Vastu for homes in the USA and the post on magnetic North versus true North explain what to do with that gap.

What is tradition and what is fact

Tradition

  • The classical texts found directions with the sun's shadow, which gives true directions, not with a magnetic compass (Mayamata ch. 6) [11].
  • Vastu16's two schools read zones from North: 16 zones of 22.5 degrees or 8 directions of 45 degrees [10].

Physical fact

  • An unrotated Google map is north-up, and its bearing is measured from true north [1][2].
  • Declination is the angle between magnetic and true North, and it changes over time [7][8].
  • Local compass anomalies of 3 to 4 degrees are not uncommon [6].

Where Vastu16 fits

Vastu16's free check builds this method in. You place your plan over a satellite view and turn it in 1 or 5 degree steps until the walls line up, then confirm with a phone compass. You can check your floor plan under both schools once North is set. The result rates North as High, Medium or Low: High needs the map match and the compass to agree within 8 degrees, and rooms within 5 degrees of a zone line are flagged [10]. The check cannot find your building for you or correct a wrong wing. The full method is on the methodology page.

Questions people ask

Can I find North on Google Maps?

Yes. Google Maps draws its map with north at the top unless you rotate it. Open the satellite view, make sure the view is flat and not rotated, and the top edge of the screen points to true North. You can then measure the angle of your building's walls against that edge and transfer it to your floor plan.

Is Google Maps true North or magnetic North?

True North. Google's developer documentation measures the map's bearing in degrees from true north, and a bearing of zero means the top of the map points to true north. A phone compass shows magnetic North. In Mumbai, Delhi and Bengaluru the two differ by about a degree or less. In parts of the USA they differ by 12 to 15 degrees.

How do I find the direction of my flat from the map?

Find your tower and your wing on the satellite view, pick a long outer wall that also appears on your plan, and measure its angle from the vertical edge of the screen. Rotate the plan by that angle so its wall matches. The direction your main door faces then reads straight off the aligned plan.

Sources

  1. Google Maps Platform: Map and Tile Coordinates
  2. Google Maps Platform: Vector Map Features (tilt, heading and camera bearing)
  3. Google Maps Help: Search by latitude and longitude
  4. Google Earth Help: Measure distances and areas in Google Earth
  5. Google Earth Help: Explore the Earth on your computer
  6. WMM Accuracy, Limitations, and Error Model
  7. NOAA NCEI Geomagnetism FAQ
  8. BGS: An Overview of the Earth's Magnetic Field
  9. World Magnetic Model (WMM) product page
  10. Vastu16 methodology and rule table (internal)
  11. Mayamata (Dagens critical edition and English translation), Vol. I
  12. Sensors (Basel) 2023: Improving Indoor Pedestrian Dead Reckoning for Smartphones under Magnetic Interference Using Deep Learning